Видео

My toughbook CF-U1 got corrupted and i cant clean the drive via DISKPART. its says i/o Device error and wont format. any help please? Thanls

If you tighten the knurled, barrel nut on the curved metal bracket underneath the motor, the fan should start to osculate back and forth.

"I grew up in a cult" you say, but you joined another...

Looks like a junk store to me but two was specific person. There’s probably some kind of treasure in there.

crushed by a giant LCD screen ...and Maximillian doesn't care

"increase power to maximum ... we are going through" ....... well There's no convincing him otherwise!

Do you have any experience with how it works on magazines that can’t lay super flat? I have some vintage magazines with really fragile spines

Me: "How good can a thermal camera be?" Also me: "Holy cow"

Maybe if you could copper coat the form it may help with the heat transfer, looks an excellent experiment all the same 👍

But i am crazy and am watching you. sooo something went wrong. ^^

the paper was such a good idea!

I'd be interested in seeing a comparison of each materials' performance using a >=0.8mm nozzle and layer height >0.5(nozzle dia.) (I read TCPoly's Print Guide 🤓)

I've been selling this kind of product forever, and have run many welding and railings shops. Notes: Tack the broken bolt head on from underneath---just for aesthetics. Drill all your weeping and bolt holes prior to assembly. Never cap the bottom of the imbedded post. Galvanize all your products for longevity (may be too expensive for small projects). Rusting is almost immediate. But use a good quality metal primer prior to painting. Invest in high speed drill bits-----forget the cheap China crap. Next time----put the post on the concrete sidewalk (4 epoxy set bolts or wedge anchors)-----and cantilever the extra foot from that (like a letter"P") But----tip of the hat for effort and ingenuity.

Did you notice a tiny MicroSD card which most likely contains all of the system files and space for additional media.

If it has low capacity it could be that the batteries have been cycled a couple of thousand times.

Would this be good for writing on the go?

You are just so awesome Rinoa!

I had to quit watching your video when the microscope abuse began. Wow, just... wow. Otherwise, I like your videos. Kind of zen.

Way cool experiment. Undeniably good scientific method and results.

Nice experiments! :)

That blue heatsink most likely came from a Dell Optiplex circa 1997-1999 and used to cool a Pentium MMX or perhaps a socket 370 Celeron.

Cool test! Great video thanks.

Nice experiment! Try annealing the models in the oven. If done right it ought to fuse the layers and help out those easier to print models..

Those are some neat materials. I guess when you print it vertically, you get air between the layers that acts as an insulator and minimal contact with the previous layer giving reduced thermal conductivity. Printing on it's side would mean each layer was in contact with the heat source and radiating outwards, with the inter layer gaps more like the gaps between the fins on a standard metal heatsink.

Hi Rinoa! Hope you are doing well. What power supply are you using or the LED?

Gosh, I love your Channel!

What also would work, is ceramic, there is a Ceramic filled Resin for SLA printer, after printing you would burn it in a Kiln, and after that you got a Ceramic part. Ceramic Heatsinks are an actual thing.

First

Turd polishing as art.

Definitly an interesting view - it almost looks like a moonscape. I like looking at things through a microscope. Science has always fascinated me - and speaking of which, I have a nice little collection of lab glass too.

I feel for you, dude! I had the same problem living in my bedroom, it was too traumatic and not a very nice place to sleep in for the rest of my life. I have been working on getting an apartment that would fit for people in my ability due to cheap rent, and I am slowly packing up for my first apartment because of the heatwave in WNY, and I am pretty soon moving out of my mom's house after almost 25 years. I had PTSD from City Honors School that resulted in triggers that would reminded me of high school, and I had constant nightmares and flashbacks that would sucking me dry and I had to quit my first job and hobby which is photography. Hopefully I had the help that I need. Thank you for this very informative and detailed video why you're not filming in the workshop very often, and a better move to a new place. Joseph

it's like being bitten by acid

Green or blue for sure!

What is aluminuinn made of 😮

2nd

Neat

Check out, Stan Gibilisco. Antenna theory. Thx

My little variac (an OG brand-name General Radio one) is mainly used as a speed controller for a shaded pole desk fan. TRIAC speed controls make the motor buzz too much.

Mine had copper shavings and used cells hiding inside!!!

Ayyee, what a great find 👍🏼

YO WHAT HAPPENED TO THAT SCREEN

After 1:51 , I need to remake/replace the slide door bracket...where can I get those?

Dont be a fool like others e.g. only looking after themselves, kicking the weak and running after idiots like Hitler or Putin. It's really a shame, it should be ensured that everyone has a safe roof over their head and can live there as long as they want without fleeing from rent or other nonsense. People have such limited, crippled brains, well, everyone does, and they fill it with all sorts of unnecessary crap, like money, power struggles, advertising, gangsters, drugs, etc. The list is endless. As a child I always wanted to build big blocks of houses for all the homeless, but it hasn't worked out so far. But that would be the right thing to do, either build so much housing until the rent is free, or expropriate. But that will never happen with money mafia parties like the Drumb. You could effectively combat anti-constitutional structures by abolishing wealth, automatically covering basic needs and completely digitizing the remaining money. Maybe then the resources that should actually last 100 times longer will last longer. Or the corporate responsibility that should theoretically prevent exploitation, bleeding of the general public and leaving destruction behind (but you can't draw conclusions about others from yourself). If the broad masses of people developed a well-considered strategy, the following could be implemented: Unconditional basic income: ensuring basic services for all. Wealth line: limiting wealth inequality. Negative interest rates: promoting investment and economic activity. (questionable) World language: facilitating global communication. Open borders: promoting freedom and mobility. Full digitalization: maximizing efficiency and access to resources.

I didn’t have a problem with the charger heating up.

you didn't mean real poverty, maybe the man does not feel poor, he has nature and he preserves it: This tribe showers with cow urine: The Mundari Tribe of South Sudan

as from the cells it will take those 1280 when charge.. and without the bms it will do 1280wh so they might be true values of the cells .. just saying

As an australian, I always work in the sun with a wide brimmed hat, fastened with a draw string under the chin, so one can forget about it, also loose, long sleeves. much cooler

i must disagree with your opinion on bare feet while chainsawing a log. it could fall,. Having unprotected feet is a risk i will not take

take care of your wood. do not store it on the ground, put sacrificial wood on the ground to rot first, do not overheat the wood, do not leave it in direct (australian ) sun, do not suddenly change temperature,. invest in end grain sealer to slow water loss and reduce cracking. enjoy your woodworking

There’s a Black hole - why the thrusters?